TP-Link T1600G-28PS T1600G-28PSUN V3 CLI Reference Guide Guide - Page 58

4.13 reboot-schedule Description This reboot-schedule command is used to configure the switch to reboot at a certain time point. To delete the reboot schedule settings, please use the reboot-schedule cancel command. Syntax reboot-schedule at time [ date ] [ save_before_reboot ] reboot-schedule in interval [ save_before_reboot ] reboot-schedule cancel Parameter time -- Specify the time point for the switch to reboot, in the format of hh:mm. date -- Specify the date for the switch to reboot, in the format of DD:MM:YYYY. The date should be within 30 days. save_before_reboot -- Save the configuration file before the switch reboots. interval -- Specify a time period after which the switch reboots. It ranges from 1 to 43200 minutes. cancel -- Delete the reboot schedule settings. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. User Guidelines In the command reboot-schedule at time [ date ] [ save_before_reboot ], if no date is specified and the time you set here is later than the time that this command is executed, the switch will reboot later that day; otherwise the switch will reboot at the time point the next day. Example Specify the switch to save the configuration files and reboot in 200 minutes,: T1600G-28TS(config)# reboot-schedule in 200 save_before_reboot 37