TP-Link T1600G-28PS T1600G-28PSUN V3 CLI Reference Guide Guide - Page 423

SNMP Group. These three items of the Users in one group should be the same. v3 -- The security mode for the group, v3 indicates SNMPv3, the most secure level. slev -- The Security Level of SNMP v3 Group. There are three options, including noAuthNoPriv (no authorization and no encryption), authNoPriv (authorization and no encryption) and authPriv (authorization and encryption). By default, the Security Level is noAuthNoPriv. There is no need to configure this in SNMP v1 Mode and SNMP v2c Mode. read-view -- Select the View to be the Read View. The management access is restricted to read-only, and changes cannot be made to the assigned SNMP View. write-view -- Select the View to be the Write View. The management access is writing only and changes can be made to the assigned SNMP View. The View defined both as the Read View and the Write View can be read and modified. notify-view -- Select the View to be the Notify View. The management station can receive notification messages of the assigned SNMP view generated by the switch's SNMP agent. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Add a group, and configure the name as group 1, the Security Model as SNMP v3, the security level as authNoPriv, the management access to the assigned View viewDefault as read-write, besides the notification messages sent by View viewDefault can be received by Management station: T1600G-28TS(config)# snmp-server group group1 smode v3 slev authNoPriv read viewDefault write viewDefault notify viewDefault Delete group 1: T1600G-28TS(config)# no snmp-server group group1 smode v3 slev authNoPriv 402