TP-Link T1600G-28PS T1600G-28PSUN V3 CLI Reference Guide Guide - Page 337

Privilege Requirement Only Admin level users have access to these commands. Example Configure the login authentication method list on the ssh terminal line as "list1": T1600G-28TS(config)# line ssh T1600G-28TS(config-line)# login authentication list1 36.18 enable authentication (telnet) Description The enable authentication command is used to apply the privilege authentication method list to the telnet terminal line. To restore to the default authentication method list, please use the no enable authentication command. Syntax enable authentication { method-list } no enable authentication Parameter method-list -- Specify the enable method list on the telnet terminal line. It is "default" by default, which contains the method "none". Command Mode Line Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the enable authentication method list on the telnet terminal line as "list2": T1600G-28TS(config)#line telnet T1600G-28TS(config-line)# enable authentication list2 316