TP-Link T1600G-28PS T1600G-28PSUN V3 CLI Reference Guide Guide - Page 433

Privilege Requirement Only Admin level users have access to these commands. Example Enable all SNMP extended VLAN-related traps for the switch: T1600G-28TS(config)# snmp-server traps vlan Enable VLAN-created trap only for the switch: T1600G-28TS(config)# snmp-server traps vlan create 49.12 snmp-server traps security Description The snmp-server traps security command is used to enable the corresponding security traps. To disable this feature, please use no snmp-server traps security command. All security traps are disabled by default. Syntax snmp-server traps security { dhcp-filter | ip-mac-binding | acl } no snmp-server traps security { dhcp-filter | ip-mac-binding } Parameter dhcp-filter -- Triggered when the DHCPv4 Filter feature is enabled and the switch receives DHCP packets from an illegal DHCP server. ip-mac-binding -- Triggered when the ARP Inspection feature is enabled and the switch receives an illegal ARP packet, or the IPv4 Source Guard feature is enabled and the switch receives an illegal IP packet. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Enable the DHCP filter trap for the switch: T1600G-28TS(config)# snmp-server traps security dhcp-filter 412