TP-Link T1600G-28PS T1600G-28PSUN V3 CLI Reference Guide Guide - Page 450

"middle" and "low" in descending order. When the supply power exceeds the system power limit, the PD linked to the port with lower priority will be disconnected. By default, the priority level is "low". Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement None. Example Configure the PoE priority as "low" for port 2: T1600G-52PS(config)# interface gigabitEthernet 1/0/2 T1600G-52PS(config-if)# power inline priority low 50.5 power inline supply Description The power inline supply command is used to configure the PoE status of the corresponding port. Syntax power inline supply { enable | disable } Parameter enable | disable -- The PoE status of the port. By default, the PoE status is "enable". Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement None. Example Enable the PoE feature for port 2: T1600G-28PS(config)# interface gigabitEthernet 1/0/2 T1600G-28PS(config-if)# power inline supply enable 429