TRENDnet TEW-653AP User's Guide - Page 17

Encryption: WPA pre-shared key, ESSID Selection, Broadcast SSID, Encryption, WPA Type - bridge mode

Get TRENDnet TEW-653AP PDF manuals and user guides
UPC - 710931600704
View all TRENDnet TEW-653AP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

allow this Gateway to authenticate users. You will then be required to specify the RADIUS Server's IP address, port, and password. Encryption: WPA pre-shared key ESSID Selection: As this device supports multiple SSIDs, it is possible to configure a different security mode for each SSID (profile). Select an SSID from the drop-down list. Broadcast SSID: Select Enable or Disable from the drop-down list. This is the SSID broadcast feature. When this option is set to Enable, your wireless network name is broadcast to anyone within the range of your signal. If you're not using encryption then they could connect to your network. When this is disabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. WMM: Choose to Enable or Disable WMM. This is the Quality of Service (QoS) feature for prioritizing voice and video applications. This option can be further configured in WMM under the Wireless drop-down menu. Encryption: Select WPA pre-shared key from the drop-down list. WPA Type: Select TKIP, AES, or WPA2 Mixed. The encryption algorithm used to secure the data communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is based on WEP. AES (Advanced Encryption Standard) is a very secure block based encryption. Note that, if the bridge uses the AES option, the bridge can associate with the access point only if the access point is also set to use only AES. Pre-shared Key Type: The Key Type can be passphrase or Hex format. Pre-Shared Key: The key is entered as a pass-phrase of up to 63 alphanumeric characters in ASCII (American Standard Code for Information Interchange) format at both ends of the wireless connection. It cannot be shorter than eight characters, although for proper security it needs to be of ample length and should not be a commonly known phrase. This phrase is used to generate session keys that are unique for each wireless client.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
allow this Gateway to authenticate users. You will then be required to specify the RADIUS Server’s
IP address, port, and password.
Encryption: WPA pre-shared key
ESSID Selection:
As this device supports multiple SSIDs, it is possible to configure a different
security mode for each SSID (profile). Select an SSID from the drop-down list.
Broadcast SSID:
Select Enable or Disable from the drop-down list. This is the SSID broadcast
feature. When this option is set to Enable, your wireless network name is broadcast to anyone
within the range of your signal. If you're not using encryption then they could connect to your
network. When this is disabled, you must enter the Wireless Network Name (SSID) on the client
manually to connect to the network.
WMM:
Choose to Enable or Disable WMM. This is the Quality of Service (QoS) feature for prioritizing
voice and video applications. This option can be further configured in WMM under the Wireless
drop-down menu.
Encryption:
Select WPA pre-shared key from the drop-down list.
WPA Type:
Select TKIP, AES, or WPA2 Mixed. The encryption algorithm used to secure the data
communication. TKIP (Temporal Key Integrity Protocol) provides per-packet key generation and is
based on WEP. AES (Advanced Encryption Standard) is a very secure block based encryption. Note
that, if the bridge uses the AES option, the bridge can associate with the access point only if the
access point is also set to use only AES.
Pre-shared Key Type:
The Key Type can be passphrase or Hex format.
Pre-Shared Key:
The key is entered as a pass-phrase of up to 63 alphanumeric characters in ASCII
(American Standard Code for Information Interchange) format at both ends of the wireless
connection. It cannot be shorter than eight characters, although for proper security it needs to be of
ample length and should not be a commonly known phrase. This phrase is used to generate session
keys that are unique for each wireless client.