Thermador UCVM30FS Installation Instructions - Page 10
Installation With Cooktops
View all Thermador UCVM30FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
INSTALLATION WITH COOKTOPS WWideid3e13"7: "2:833/438"/8" Cutout and Overall Dimensions Cutout and Overall Dimensions Fig. 7 Notes Dimension "SB" is the minimum distance from the leading edge of the counter to the leading edge of the cutout. Dimension "BT" is the thickness of backsplash that provides 1/4" clearance between vent and backsplash. Any backsplash with a curved radius where it meets the counter will require additional clearance. Thicker backsplashes may be used by increasing the counter and cabinet depths. Set the cooktop into the countertop opening so that the back edge of the cooktop overlaps the leading edge of the downdraft. 10
10
Notes
Dimension
”SB”
is the minimum distance from the leading edge of the counter to the leading
edge of the cutout.
Dimension
”BT”
is the thickness of backsplash that provides 1/4” clearance between vent
and backsplash. Any backsplash with a curved radius where it meets the counter will require
additional clearance. Thicker backsplashes may be used by increasing the counter and cabi-
net depths.
Set the cooktop into the countertop opening so that the back edge of the cooktop overlaps
the leading edge of the downdraft.
Fig. 7
INSTALLATION WITH COOKTOPS
Wide 31”: 28
3
/
8
”
Wide 37”: 34
3
/
8
”
Cutout and Overall Dimensions
Cutout and Overall Dimensions