Toshiba FT-6003 Owners Manual - Page 17
Tone/pulse
View all Toshiba FT-6003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
STORING MIXED TONE/PULSE NUMBERS Your FT-6003 can also store mixed mode numbers to make it easy to access long distance services. To store a mixed mode number. CI First make sure the TONE/PULSE switch rear of the base unit is in the PULSE mode. ® Press the MEM button (a short beep will be heard), and enter the numbers to be dialed in the PULSE mode. ® Press the TONE button on the handset and enter the numbers to be dialed in the TONE mode. * When done entering numbers, press the MEM button, and the number of the memory to save the number in. You will then hear a long beep when the number has been successfully stored. If you wish to enter a pause between any of the numbers in the dialing sequence (such as for switchboard delay etc.), press the RDL/P button at the point you wish to pause in the number sequence. Pressing the RDL/P button more than once will increase the amount of the delay. EXAMPLE: (Pulse mode) (MEM)-IP- Cr) (2) C)-1.(TONE)-tv.® ® ® (MEM)-0- ERASING A STORED NUMBER T Pick up the handset. (Do not press the TALK button.) • Press the MEM button. ® Press the MEM button. ® Press the desired memory location 01 to 20. C>> t EXAMPLE: (MEM) -0-0-\IEIT/1)-4. 0 (5) The telephone number stored in will be erased. REPLACING A TELEPHONE NUMBER Just store the new number following the same steps as in STORING. The new number will take the place of the old one. DIALING A STORED NUMBER To dial a number previously stored in memory, Cl) Pick up the handset and press the TALK button. C2) Press the MEM button. ® Press the memory number 01 to 20. Your FT-6003 will then dial the previously stored number. -17-