Toshiba R600 S4202 Maintenance Manual - Page 131

3.2 Executing the Diagnostic Test 3 Tests and Diagnostics Select the option you want to execute and press Enter. When you select 1SYSTEM TEST, the following message will appear: SYSTEM TEST NAME XXXXXX xxxxxxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PASS COUNT : XXXXX WRITE DATA : XX ADDRESS : XXXXXX ERROR COUNT: XXXXX READ DATA : XX STATUS : XXX SUB-TEST MENU : 01 - ROM checksum 02 - Fan ON/OFF 03 - Geyserville 04 - Quick charge 05 - DMI read 99 - Exit to DIAGNOSTIC TEST MENU NOTE: The menu displayed by your computer may be slightly different from the one shown above. Select the desired subtest number from the subtest menu and press Enter. The following message will appear: TEST LOOP : YES (or NO) ERROR STOP : YES (or NO) Use the right and left arrow keys to move the cursor to the desired option. Selecting YES of TEST LOOP increases the pass counter by one, each time the test cycle ends and restarts the test cycle. Selecting NO returns the process to the subtest menu after the test is complete. PORTEGE R600 Maintenance Manual (960-709) [CONFIDENTIAL] 3-7