Toshiba R600 S4202 Maintenance Manual - Page 219
Compatibility, Auto-Selected, LCD+AnalogRGB, Enabled, Disabled
UPC - 883974167104
View all Toshiba R600 S4202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
3.32 SETUP 3 Tests and Diagnostics (c) SATA Controller Mode This feature sets the SATA Controller Mode. AHCI Sets AHCI which is the mode for VistaTM (default) Compatibility Sets the mode for legacy OS. Use this mode when the driver corresponding to AHCI is not used. 10. PCI Bus This option displays the interrupt level for the Card Bus in the computer. It is for information only and cannot be changed. PCI BUS = IRQ10, IRQ11 11. Display This group of options configures the computer's display. (a) Power On Display This option is used to select the display when booting up. Auto-Selected Selects an external monitor if one is connected. Otherwise it selects the internal LCD. (Default) LCD+AnalogRGB Selects both the internal LCD and the external monitor for simultaneous display. NOTE: Pressing Fn+F5 changes the display setting in the order of internal LCD to simultaneous to external monitor. 12. Peripheral Use this option to select the peripheral's mode. (a) Internal Pointing Device This option enables or disables the touch pad Enabled Enables the touch pad. (Default) Disabled Disables the touch pad. PORTEGE R600 Maintenance Manual (960-709) [CONFIDENTIAL] 3-95