Toshiba R600 S4202 Maintenance Manual - Page 146
Tests and Diagnostics, 10 Floppy Disk Test
UPC - 883974167104
View all Toshiba R600 S4202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
3 Tests and Diagnostics 3.10 Floppy Disk Test Select the number of the subtest you want to execute and press Enter. The following message will appear during the floppy disk test. FLOPPY DISK IN PROGRESS XXXXXXX xxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST PASS COUNT WRITE DATA ADDRESS : XX : XXXXX : XX : XXXXXX ERROR COUNT READ DATA STATUS : XXXXX : XX : XXX When the subtest 04 or 05 is selected, the following messages will appear on the screen. Select the test data (subtest 04 only), track number and head number you want to test. Test data Track No. Head No. ?? (subtest 04 only) ?? ? Subtest 01 Sequential read This subtest performs a Cyclic Redundancy Check (CRC) that continuously reads all the tracks (track: 0 to 39/0 to 79) on a floppy disk. Subtest 02 Sequential read/write This subtest continuously writes data pattern B5ADADh to all the tracks (track: 0 to 39/0 to 79) on a floppy disk. The data is then read and compared to the original data. Subtest 03 Random address/data This subtest writes random data to random addresses on all tracks (track: 0 to 39/0 to 79) on a floppy disk. The data is then read and compared to the original data. Subtest 04 Write specified address This subtest writes the data specified by an operator to a specified track, head, and address. Subtest 05 Read specified address This subtest reads data from a track, head, and address specified by an operator. 3-22 [CONFIDENTIAL] PORTEGE R600 Maintenance Manual (960-709)