Toshiba R600 S4202 Maintenance Manual - Page 255
Optical disk drive DVD-Super Multi drive/SD board
UPC - 883974167104
View all Toshiba R600 S4202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
4.11 Optical disk drive (DVD-Super Multi drive)/SD board 4 Replacement Procedures 4.11 Optical disk drive (DVD-Super Multi drive)/SD board Removing the Optical disk drive/SD board To remove the optical disk drive/SD board, follow the steps below and refer to Figure 4-13 to 4-15. CAUTION: When the optical disk inside the optical disk drive can not be ejected because of some failure, open the disc tray by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole near the eject button. 1. Disconnect the SD board FPC from the connector CN9700 on the system board. 2. Stand the optical disk drive and remove the following screws. • M2×3B S-THIN HEAD ×4 3. Slide the SD board outside and lift up the optical disk drive and SD board to remove. (SD board FPC is fixed to the cover assembly by the double-sided tape.) M2x3B S-THIN HEAD CN9700 M2x3B S-THIN HEAD SD board FPC SD board Optical disk drive Guide Double-sided tape Figure 4-13 Removing the optical disk drive/SD board (1) PORTÉGÉ R600 Maintenance Manual (960-709) [CONFIDENTIAL] 4-27