Toshiba UT1A1A010C6 User Guide - Page 41
Normal Display, UPS Meters Display, LCD Message, Description
View all Toshiba UT1A1A010C6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Status of the UPS, measurements, and alarms are all indicated on the LCD screen. Tower Unit ON ON-LINE ON-BATT BYPASS FAULT Rack Unit FLAG ENTER ON/OFF Figure 3 Control panels 7.4 Normal Display The UPS status is shown in the normal display mode. The UPS Meters display and the Setting display may be accessed by pressing the Return button on Tower Unit and FUNC button on the Rack Unit. 7.5 UPS Meters Display Listed below are the parameters available for viewing from the UPS meters display. Press this button to scroll through the parameters. LCD Message O/P VOLT= xxx.xV O/P FREQ= xx.x Hz I/P VOL T= xxx.xV I/P FREQ= xx.x Hz Description Shows Output AC Voltage Shows Output Frequency Shows Input AC Voltage Shows Input Frequency 19
Status of the UPS, measurements, and alarms are all indicated on the LCD screen.
19
Figure 3 Control panels
7.4
Normal Display
The UPS status is shown in the normal display mode. The UPS Meters display and the
Setting display may be accessed by pressing the Return button on Tower Unit and
FUNC button on the Rack Unit.
7.5
UPS Meters Display
Listed below are the parameters available for viewing from the UPS meters display.
Press this button to scroll through the parameters.
LCD Message
Description
O/P VOLT= xxx.xV
Shows Output AC Voltage
O/P FREQ= xx.x Hz
Shows Output Frequency
I/P VOL T= xxx.xV
Shows Input AC Voltage
I/P FREQ= xx.x Hz
Shows Input Frequency
Rack Unit
Tower Unit
ON
ON-LINE
ON-BATT
BYPASS
FAULT
FLAG
ENTER
ON/OFF