Tripp Lite BP48V Eaton Tripp Lite SmartOnline Series Tower UPS Advanced User G - Page 13
Installation
View all Tripp Lite BP48V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 3 Installation 3.1 Inspecting the equipment If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier or place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file a claim for concealed damage. To file a claim for shipping damage or concealed damage: 1. File with the carrier within 15 days of receipt of the equipment; 2. Send a copy of the damage claim within 15 days to your service representative. NOTE Check the battery recharge date on the shipping carton label. If the date has passed and the batteries were never recharged, do not use the UPS. Contact your service representative. 3.2 Checking the Accessory Kit • Verify that the following additional items are included with the UPS: Figure 3. Checking the accessory kit 1 1 SmartOnlineUPS 2 RS232 communication cable 3 USB communication cable 4 Safety instructions 5 Quick start 6 (Optional LXE Network Card) 3 6 STATUS CONFIG RESET 5 4 2 3.3 SmartOnline UPS Installation If you ordered other UPS accessories, refer to specific user manuals to check the tower installation with the UPS. NOTE 1 Place the UPS on a flat, stable surface in its final location. NOTE 2 Always keep 150 mm of free space behind the UPS rear panel. Tripp Lite by Eaton SmartOnline Series User Guide 614-21326-Rev 01 7