Tripp Lite BP48V Eaton Tripp Lite SmartOnline Series Tower UPS Advanced User G - Page 18

LCD Description 4.2 LCD Description The LCD screen has 2 lines, each line has 16 characters. The first line shows UPS status, the second line shows measures. After 5 minutes of inactivity, the LCD displays the screen saver, and the LCD backlight automatically dims. Press any button to restore the screen. Note: If fault or alarm appears, the first line of LCD will cycle between fault/alarm message and UPS mode, see troubleshooting page for additional information. Figure 9. LCD Description LCD mode description Load/equipment status ONLINE MODE LOAD:100% 2700W ESC The following table describes the status information provided by the UPS Note: If other indicator appears, see the troubleshooting for additional information. Table 4. LCD Operating Modes UPS Display Description STANDBY MODE IN:120V 60.0HZ Equipment is not powered until button is pressed. The UPS is Off, waiting for startup command from user. ONLINE MODE LOAD:100% 3000VA The UPS is powering and protecting the equipment. The UPS is operating normally. BATTERY MODE RUNTIME:104MIN A utility failure has occurred and the UPS is on Battery mode. The UPS is powering the equipment with the battery power. Prepare your equipment for shutdown. 12 Tripp Lite by Eaton SmartOnline Series User Guide 614-21326-Rev 01