Tripp Lite BP48V Eaton Tripp Lite SmartOnline Series Tower UPS Advanced User G - Page 33

ConfiguringtheBatterySettings

Get Tripp Lite BP48V PDF manuals and user guides View all Tripp Lite BP48V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Configuring the Battery Settings 1. From the "UPS Home Menu" press the button to enter into the "Main Menu Screen". 2. In the "Main Menu Screen" press the or button until the "IN / OUT SETTINGS" menu is displayed. 3. Press the button. Use the or arrow buttons to display "HIGH EFFIC. MODE". 4. Press the button and change the setting to "ENABLED". 5. The UPS transfers to High Efficiency mode after 5 minutes. 5.7 Configuring the Battery Settings Low battery warning During discharge, the low battery alarm is activated if the remaining runtime goes below 3 minutes or less than the setting capacity threshold (0 % by default). This threshold can be modified. Restart battery level This setting is used to define the battery restart level. The battery level must reach this threshold (0 % by default) to enable UPS start. See the 4.5 User Settings section to modify these settings. 5.8 Retrieving the Event Log To retrieve the Event log through the display: 1. From the "4.3 UPS Home Menu" press the button to enter into the "4.5 User Settings". 2. In the "4.5 User Settings" press the or button until the "Event Log" menu is displayed. 3. Press the button. Use the or arrow buttons to display the events. The log retains 50 events with the most recent event listed as the first event. Press the ESC button twice to exit back to the "4.3 UPS Home Menu" menu . Tripp Lite by Eaton SmartOnline Series User Guide 614-21326-Rev 01 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Tripp Lite by Eaton SmartOnline Series User Guide 614-21326—Rev 01
27
1.
From the
“UPS Home Menu“
press the
button to enter into the
“Main Menu Screen”
.
2.
In the
“Main Menu Screen”
press the
or
button until the “IN / OUT SETTINGS” menu is displayed.
3.
Press the
button. Use the
or
arrow buttons to display “HIGH EFFIC. MODE”.
4.
Press the
button and change the setting to “ENABLED”.
5.
The UPS transfers to High Efficiency mode after 5 minutes.
5.7 ConfiguringtheBatterySettings
Lowbatterywarning
During discharge, the low battery alarm is activated if the remaining runtime goes below 3 minutes or less than
the setting capacity threshold (0 % by default). This threshold can be modified.
Restartbatterylevel
This setting is used to define the battery restart level. The battery level must reach this threshold (0 % by
default) to enable UPS start.
See the
4.5
User Settings
section to modify these settings.
5.8 RetrievingtheEventLog
To retrieve the Event log through the display:
1.
From the
“
4.3 UPS Home Menu
“
press the
button to enter into the
“
4.5 User Settings
”
.
2.
In the
“
4.5 User Settings
”
press the
or
button until the “Event Log” menu is displayed.
3.
Press the
button. Use the
or
arrow buttons to display the events.
The log retains 50 events with the most recent event listed as the first event. Press the ESC button twice to
exit back to the “
4.3
UPS Home Menu
” menu .
ConfiguringtheBatterySettings