Uniden BCD160DN English Owners Manual - Page 19

Set Backlight Adjust the backlight level through the menus. 1. From MENU/Settings, scroll to Set Backlight and press Yes/E. 2. Scroll to Set Mode and press Yes/E. 3. Set Mode lets you determine how long the backlight stays on. Select one of the following: • 10 sec - The backlight stays on for 10 seconds after you press . • 30 sec - The backlight stays on for 30 seconds after you press . • Squelch - The backlight turns on when the squelch opens, then stays on for 5 seconds. • Keypress - The backlight turns on when any key is pressed then stays on for 10 seconds. • Infinite - The backlight turns on when you press you press again. then stays on until 4. After selecting a mode, press Yes/E. The SET BACKLIGHT menu displays again. 5. Scroll to Set Dimmer and press Yes/E. 6. The Set Dimmer menu sets how bight the backlight will be. As you scroll through the options, a sample screen at that option displays. Scroll to High, Middle, Low, or Off and press Yes/E to save and exit. 7. Press Menu to return to the Settings menu. Adjust Key Beep this setting turns key beep on and off and adjusts its volume level. 1. From MENU/Settings, select Adjust Key Beep and press Yes/E. 2. Select a key beep volume level (1 - 15), Auto (the scanner sets the alert beep to the master volume level), or Off (no sound is made). NOTE: When you scroll through the volume level options, the scanner beeps at that level. 3. Press Yes/E to set the desired beep level and return to the Settings menu. Adjust Contrast This setting controls the display's contrast.. 1. From MENU/Settings, scroll to Adjust Contrast and press Yes/E. 2. Fifteen contrast levels display. The screen displays the contrast level as you scroll through the options. Select a contrast level and press Yes/E to save it and return to the Setting menu. 19