Uniden BCD160DN English Owners Manual - Page 26

After entering a new channel name, press MENU to return to the previous screen. Select Edit Frequency. 4. Edit Channel. Enter frequencies into the bank's channels one by one. If you have already entered a frequency, you can edit up to 100 registered frequencies in each bank. Bank 1 starts at CH001 and ends at CH100; Bank 2 begins at CH101 and ends a CH200, etc. NOTE: The scanner automatically rounds the entered number to the nearest supported frequency. For example, if you enter 151.473 MHz, the scanner rounds it to 151.475. If you enter a frequency that has already been entered elsewhere, the channel number and Frequency Exists - Accept? (Y/N) displays. If you entered the frequency by mistake, press ./No and enter the correct frequency. If you press Yes/E to accept, that frequency will be entered twice. There are 11 settings you can specify for each selected channel: • Edit Name. You can set a name for the channel and change it as needed. If you do not edit the channel name, it will default to "BANK 1-001, etc." NOTE: When a frequency is received and scanning stops, the name of that channel displays on the screen. • Edit Frequency. Enter a frequency within the frequency range supported by this radio. Decimal numbers may be rounded depending on the frequency; it does not affect performance. If you enter a frequency that has already been registered, the Radio displays Frequency Exists Accept ? (Y/N). See page 25 for entering frequency details. NOTE: Check websites for frequencies that can be received in your area. Uniden recommends visiting www.radioreference.com, which has a lot of information about scanner radios and frequencies. You can also use a scanner shop that offers a service (for a fee) that programs frequencies for your location into your scanner. 26