Uniden BCD160DN English Owners Manual - Page 31
svc/8, Yes/E
View all Uniden BCD160DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Service List Name SVC Bank 1 SVC Bank 2 SVC Bank 3 SVC Bank 4 SVC SVC Bank 5 Bank 6 8 FRS/ FRS/ GMRS/ GMRS/ MURS MURS 9 Racing Racing 10 FM FM Broadcast Broadcast 11 Military Military Air Air 12 Custom 1 13 Custom 2 14 Custom 3 There are three ways to start a Service Search: 1. Press FUNC then svc/8 to display a list of services. Select the service you want and press Yes/E. 2. Press MENU/Search for .../Service Search to display a list of services. Select the service you want and press Yes/E. 3. Assign a specific service to the sr key in advance; press FUNC and then the sr2 key to start. (See page 39.) NOTE: Factory presets sr2 is preset to Public Safety. Press FUNC and then sr2 to start searching Public Safety channels. The Public Safety channels themselves are divided into four bands by frequency band and assigned to SVC Banks 1, 2, 3, and 4. SVC: 1 2 3 4 displays on the bottom line of the screen. • SVC:1 = Pub. Safety LOW • SVC:2 = Pub. Safety HI • SVC:3 = Pub. Safety UHF • SVC:4 = Pub. Safety 800 NOTE: Disabled or empty service bank numbers are not displayed. The currently searched bank number flashes. You can turn service banks on/off by using the 1-9/0 keys; however, one service bank must be enabled. An error tone sounds if you try to disable the last remaining bank number. NOTE: You can change the names and combinations of service lists; however, the frequencies registered for each service cannot be edited. Also, modulation for each service cannot be overridden by pressing FUNC + 9(mod) key. 31