Uniden BCD160DN English Owners Manual - Page 36

Auto 5 KHz 6.25 KHz 7.5 KHz 8.33 KHz 10 KHz 12.5 KHz 15 KHz 20 KHz 25 KHz 50 KHz 100 KHz 2. Scroll to the step you want to set. Press Yes/E or push the scroll control knob when you have finished editing to save the entry, exit, and display the previous menu. Set Delay Time For: 0, 1, 2, 5, 10, 30 seconds: Sets the time to stay on that frequency after the transmission ends. NOTE: You can wait for a delayed reply to that transmission. If set to 0, the search starts as soon as transmission ends; if there is a reply after 1 second, you may miss it. Increasing this time will slow down the overall search but allow time for a reply to be heard. For: -2. -5, -10, -30 seconds: If negative values are set for a frequency, the scanner stays on that frequency for the set amount of time after receiving a signal. For example, if you set this value to -2 seconds, you will only hear the first 2 seconds of a 10-second transmission. Scroll to the desired delay time and press Yes/E to save and exit. Set Modulation When you select AUTO, the radio uses the default mode for that frequency. If you want to specifically change the mode and bandwidth, you can change it manually. Modulation options are: • Auto • AM • NFM • FM • WFM • FMB NOTE: Press FUNC + 9(mod) in Search mode to override modulation. Set Attenuator Press FUNC + 7/att to add an attenuator per frequency for an individual search bank. If a strong signal source exists near the desired frequency or at the image frequency, it may interfere with the desired frequency's reception. Turning on ATT weakens the received signal but may improve communication clarity. Normally, use it with OFF. 36