Uniden BCD160DN English Owners Manual - Page 46
Using Tone-out Standby/search
View all Uniden BCD160DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
• 1, 2, 5, 10, 30 (seconds) - the scanner resumes standby mode after the carrier drops and the selected time expires. • Infinite - you must press Hold after a page to resume standby mode. 8. Scroll to Set Alert and press Yes/E. 9. Scroll to Set Alert Tone and press Yes/E. 10. At Set Tone, scroll through the options (Off or Alert 1 - 9) and press Yes/E once you have selected one. The scanner sounds each tone as you scroll through them. Set Level displays. 11. At Set Level, scroll to Level 1-15 to hear volume levels or Auto (the scanner sets the alert beep to the master volume level) and press Yes/E. Set Alert displays again. 12. Scroll to Set Alert Light and press Yes/E. 13. Scroll to On, Off, Slow Blink, or Fast Blink and press Yes/E. The Set Alert screen displays again and the scanner lights according to the option selected. 14. Press MENU twice and then repeat to program more tones. Tone-Out Status = Standby Tone A and B frequencies Tone-Out channel name Tone-Out channel number Tone-Out Status = Search Tone-Out channel name Tone-Out channel number Tone A, B frequency = 0.0 Hz USING TONE-OUT STANDBY/SEARCH (See Setting Up Tone-Out first, page 44.) 1. Press MENU. Scroll to Tone-Out for... and press Yes/E. 46