Uniden BCD160DN English Owners Manual - Page 28

att/7, Set Alert Light

Get Uniden BCD160DN PDF manuals and user guides View all Uniden BCD160DN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

• Set Modulation. When you select AUTO, the radio will use the default mode for that selected frequency. If you want to intentionally change the mode and bandwidth, you can change it manually. Press Func + 9(mod) during Scan Hold mode to override modulation . • Set Delay Time. Scroll to the desired delay time and press Yes/E to save and exit. - 0, 1, 2, 5, 10, 30 seconds. Sets the time to stay on that frequency after transmission ends. Doing this lets you wait for a delayed reply to that transmission. If set to 0, the scan will start as soon as the transmission ends; if there is a reply after 1 second, you may miss it. Increasing this time will slow down the overall scan time. - -2, -5, -10, -30 seconds. If set to a negative value on that frequency, the radio stays on that frequency for the set amount of time after receiving a signal. For example, if you select -2 seconds, you will only hear the first 2 seconds of a 10 second transmission. • Set Attenuator Add attenuation per individual frequency. Attenuation can also be set globally. If a strong signal source exists near the desired frequency, it may interfere with reception of the desired frequency. Turning ATT ON weakens the received signal but may improve communication clarity. Under normal circumstances, use it with OFF. - Press FUNC + att/7 to override this setting during Scan/Hold mode. - Press and hold FUNC + att/7 to toggle global attenuator. • Set Priority. Select one or more frequencies to be enabled (or disabled) as Priority channels. Enabled channels can be prioritized during scanning. See the Priority Scan menu on page 71 for more details. • Set Alert. When Alert is turned on and this specific frequency is received, a short alert can sound and the backlight can blink. - Set Alert Tone. Choose from 9 alert sounds (1 - 9) or Off. The radio sounds each tone as it is selected. After selecting the tone, Set Alert Level displays. Select the tone volume (Auto, 1 - 15). - Set Alert Light. The radio backlight LCD turns on/blinks according to this setting when this frequency is received. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
28
•
Set Modulation.
When you select
AUTO
, the radio will use the default
mode for that selected frequency.
If you want to intentionally change the mode and bandwidth, you can
change it manually.
Press
Func
+
9(mod)
during Scan Hold mode to override modulation
.
•
Set Delay Time.
Scroll to the desired delay time and press
Yes/E
to save
and exit.
-
0, 1, 2, 5, 10, 30 seconds. Sets the time to stay on that frequency
after transmission ends. Doing this lets you wait for a delayed
reply to that transmission. If set to 0, the scan will start as soon
as the transmission ends; if there is a reply after 1 second, you
may miss it. Increasing this time will slow down the overall scan
time.
-
-2, -5, -10, -30 seconds. If set to a negative value on that
frequency, the radio stays on that frequency for the set amount
of time after receiving a signal. For example, if you select -2
seconds, you will only hear the
fi
rst 2 seconds of a 10 second
transmission.
•
Set Attenuator
Add attenuation per individual frequency. Attenuation can
also be set globally.
If a strong signal source exists near the desired frequency, it may interfere
with reception of the desired frequency. Turning ATT ON weakens the
received signal but may improve communication clarity. Under normal
circumstances, use it with OFF.
-
Press
FUNC
+
att/7
to override this setting during Scan/Hold
mode.
-
Press and hold
FUNC
+
att/7
to toggle global attenuator.
•
Set Priority
.
Select one or more frequencies to be enabled (or disabled)
as Priority channels. Enabled channels can be prioritized during scanning.
See the Priority Scan menu on page 71 for more details.
•
Set Alert
.
When Alert is turned on and this speci
fi
c frequency is received,
a short alert can sound and the backlight can blink.
-
Set Alert Tone
.
Choose from 9 alert sounds (1 - 9) or Off. The
radio sounds each tone as it is selected. After selecting the tone,
Set Alert Level
displays. Select the tone volume (Auto, 1 - 15).
-
Set Alert Light
. The radio backlight LCD turns on/blinks
according to this setting when this frequency is received.