Uniden BCD160DN English Owners Manual - Page 51
Change Center Frequency, Change Modulation
View all Uniden BCD160DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Change Center Frequency SPN (Search Span) Hz CF (Center Freq) MHz STP (Search Step) Hz Enter a Specific Frequency 1. To change the center frequency, press ./no until CF is blinking then press Yes/E. The Edit Center Freq menu displays. 2. Use the keypad to enter the new center frequency. Press Yes/E to save and exit. NOTE: Setup mode automatically times out if there is no input for 10 seconds. Set Current Frequency Marker Position to Center Frequency 1. Press pri./No until CF blinks. 2. To set the frequency at the frequency marker position as the center frequency, press Yes/E. The Edit Center Freq menu displays. 3. Use the keypad to enter the center frequency; press L/O to exit if there are no additional settings. Change the Search Span Range 1. To change the search span, press ./no until SPN is blinking. 2. Use the scroll control to select 0.2 - 500 MHz; press L/O to exit. Set a span of 100, CF is at 50. Change the Search Step 1. To change the search step, press ./no until STP is blinking. 2. Turn the scroll control knob to change the search step options on the screen. Stop at the desired search step. 3. Press L/O to exit. Change Modulation 1. Press FUNC + mod/9 to access the modulation options. Keep pressing mod/9 quickly to cycle through the options. Normally, use the default AUTO. 51