Uniden BCD160DN English Owners Manual - Page 54

Adjust Contrast, Band Defaults, Factory Reset

Get Uniden BCD160DN PDF manuals and user guides View all Uniden BCD160DN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

2. The maximum charge time in hours, 14, displays. Use the number keys to set a charge time between 1 - 14 (default = 8). Press Yes/E to save and exit. ADJUST CONTRAST This setting controls the display's contrast. 1. From MENU/Settings, scroll to Adjust Contrast and press Yes/E. 2. Fifteen contrast levels display. The screen displays the contrast level as you scroll through the options. Select a contrast level and press Yes/E to save it and return to the Setting menu. BAND DEFAULTS This setting allows you to change the default "Auto" values you can select while programming frequencies, searches, etc., to whatever you feel "Auto" should be for each band (vs. the radio defaults). Since all of the step and modulation settings default to "Auto," this allows you to skip those settings when programming. NOTE: These settings do not affect service searches. 1. From MENU/Settings/Band Defaults, scroll to the band you wish to edit and press Yes/E. The Set Modulation menu for that band displays. 2. Scroll to AM, NFM, FM, WFM, or FMB (Broadcast) and press Yes/E to save and exit. The Set Step menu for that band displays. 3. Scroll to one of the following options and press Yes/E to save and exit. Auto 5 kHz 6.25 kHz 7.5 kHz 8.33 kHz 10 kHz 12.5 kHz 15 kHz 20 kHz 25 kHz 50 kHz 100 kHz 4. Scroll to other bands to edit. When complete, press MENU to return to the Settings menu. FACTORY RESET WARNING: Resetting the scanner clears all data and settings you have entered. You cannot restore user programmed data that has been deleted. You can restore only the original factory settings. 1. From MENU/Settings, scroll to Factory Reset and press Yes/E. Cancel and OK display. 2. Select OK to reset the scanner to factory settings or Cancel to return to the Settings menu. Press Yes/E. 3. If you reset the scanner to factory settings, the power will turn off after the data is erased and restored to factory settings. NOTE: To save the settings, Uniden recommends using the BCDX60DN SS program to back them up before resetting. Refer to www.uniden.com for BB_VUP software. 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
54
2.
The maximum charge time in hours,
14
, displays. Use the number keys to set a
charge time between 1 - 14 (default = 8). Press
Yes/E
to save and exit.
ADJUST CONTRAST
This setting controls the display’s contrast.
1.
From
MENU
/
Settings
, scroll to
Adjust Contrast
and press
Yes/E
.
2.
Fifteen contrast levels display. The screen displays the contrast level as you
scroll through the options. Select a contrast level and press
Yes/E
to save it
and return to the
Setting
menu.
BAND DEFAULTS
This setting allows you to change the default “Auto” values you can select while
programming frequencies, searches, etc., to whatever you feel “Auto” should be
for each band (vs. the radio defaults). Since all of the step and modulation settings
default to “Auto,” this allows you to skip those settings when programming.
NOTE: These settings do not affect service searches.
1.
From
MENU
/
Settings
/
Band Defaults
, scroll to the band you wish to edit and
press
Yes/E
. The
Set Modulation
menu for that band displays.
2.
Scroll to
AM
,
NFM
,
FM
,
WFM
, or
FMB
(Broadcast) and press
Yes/E
to save
and exit. The
Set Step
menu for that band displays.
3.
Scroll to one of the following options and press
Yes/E
to save and exit.
Auto
5 kHz
6.25 kHz
7.5 kHz
8.33 kHz
10 kHz
12.5 kHz
15 kHz
20 kHz
25 kHz
50 kHz
100 kHz
4.
Scroll to other bands to edit. When complete, press
MENU
to return to the
Settings
menu.
FACTORY RESET
WARNING: Resetting the scanner clears all data and settings you have
entered. You cannot restore user programmed data that has been deleted. You
can restore only the original factory settings.
1.
From
MENU
/
Settings
, scroll to
Factory Reset
and press
Yes/E
.
Cancel
and
OK
display.
2.
Select
OK
to reset the scanner to factory settings or
Cancel
to return to the
Settings
menu. Press
Yes/E
.
3.
If you reset the scanner to factory settings, the power will turn off after the data
is erased and restored to factory settings.
NOTE: To save the settings, Uniden recommends using the BCDX60DN SS program
to back them up before resetting. Refer to www.uniden.com for BB_VUP software.