ViewSonic VX710 Service Manual - Page 8

2. Specification 2.1. GENERAL REQUIREMENTS General Specifications Test Resolution & Frequency Test Image Size Contrast and Brightness Controls 2.2 SIGNAL INTERFACE Video Interface Analog Input Connector Video Cable Strain Relief Video Cable Connector DB-15 Pinout Video Signals Video Impedance Maximum PC Video Signal Maximum Mac Video Signal Sync Signals DDC 1/2B Video Compatibility Resolution Compatibility Exclusions 2.3. POWER Power Supply Internal Power Supply Input Voltage Range Input Frequency Range Short Circuit Protection Over Current Protection Leakage Current EFFICIENCY Fuse Power Dissipation Max Input AC Current 1280 x 1024 @ 60Hz Full Size Factory Default: Contrast = 70%, Brightness = 100% DB-15 (Analog) Equal to twice the weight of the monitor for five minutes. Compliant DDC 2B. Video RGB (Analog) 75 Ohms (Analog) 950 mV with no damage to monitor 1250 mV with no damage to monitor TTL Compliant with Revision 1.3 Shall be compatible with all PC type computers, Macintosh computers, and after market video cards. 640 x 350, 640 x 480, 720 x 400 (640 x 400), 800 x 600, 832 x 624, 1024 x 768, 1280 x 720, 1280 x 1024 Not compatible with interlaced video. Part Number: / FSP035-1PI01 90 TO 264 VAC 47.5 TO 63 HERTZ Output can be shorted without damage. 4.5 A typical at 12 VDC 3.5mA (Max) at 254VAC / 60Hz 70 % typical at 115VAC Full Load Internal and not user replaceable 35 Watts (typ) 1.2 Arms @ 90VAC, 0.8 Arms @180VAC ViewSonic Corporation Confidential - Do Not Copy VX710 5