Weider Pro 5500 User Manual - Page 19
Pulley 48. Attach the Pulley, a Cable Trap 56
View all Weider Pro 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
30. Attach a 90mm Pulley (48) inside the Front Leg (10) with an M10 x 65mm Bolt (85), two M10 30 Washers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77). Make sure the Leg Lever Cable (51) is under the Pulley. 85 10 80 109 48 51 109 80 77 31. Route the Leg Lever Cable (51) under the 89.5mm Spacer (59), through the Upright (2), and 31 under the indicated rod in the Base (1). Wrap the Leg Lever Cable under a 90mm Pulley (48). Attach the Pulley to the Base with an M10 x 45mm Bolt (86), two Half Guards (55), and an M10 Nylon Locknut (77). 59 2 86 48 55 51 1 55 77 Rod 32. Wrap the Leg Lever Cable (51) over a 90mm 32 Pulley (48). Attach the Pulley, a Cable Trap (56), and two Half Guards (55) to the second hole from the bottom of the Pulley Plates (60) with an M10 x 50mm Bolt (97) and an M10 Nylon Locknut (77). Make sure the Cable Trap and the Half Guards are oriented as shown. 60 77 55 56 51 55 97 48 19