Weider Pro 9655 English Manual - Page 22
Screw
View all Weider Pro 9655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
46. Attach the Front Backrest (41) to the Front 46 Upright (42) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Flat Washers .(10). The Backrest must be oriented as shown. 42 43 '- • 41 47. Press a 1 1/2" Square Inner Cap (32) into the Front Seat Frame (36). Insert a 1/4" x 2" Carriage Bolt (38) through the center hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4" x 1/2" Screws (18). Insert the 1/4" x 2" Carriage Bolt (38) through the indicated hole in the Front Seat Frame (36). Tighten a 1/4" Nylon Locknut (2) with a 1/4" Flat Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Front Seat Frame (36) with a 1/4" Flat Washer 2 (10) and a 1/4" x 2" Machine Screw (81). 48. Press a 1 1/2" Square Inner Cap (32) into the Leg Lever (29). Lubricate the 5/16" x 2 1/4" Bolt (33). Attach the Leg Lever (29) to the Front Seat Frame (36) with the Bolt and a 5/16" Nylon Locknut (3). - Insert the 5/16" x 2" Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 5/16" Nylon Locknut (3) with a 5/16" Flat Washer (8) onto the Eyebolt. 49. Rest the Front Seat Frame (36) on the indicated pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16" x 2 3/4" Carriage Bolt (14) and the Seat Knob (40). r 43 10 . _ Thick End . \\ 47 13 37 81-----ji 10 38 18 32 % 36 2 48 ,---'.. 0', 36 Lubricate-33 - 3 - . 29 . 8 35 0 .• - 32 -46 49 42 40 . 4 • 36 _. . Pin 22