Weider Pro 9655 English Manual - Page 23
tightening
View all Weider Pro 9655 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ASSEMBLY 50. Press two 3/4" Round Inner Caps (34) into 50 each Pad Tube (28). Insert a Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube. Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Foam Pad (30) onto each end of the Pad Tube. 51. Remove the backing from the PRO 9655 decal and apply it to the home gym system as 51 shown. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in HOW TO USE THE HOME GYM SYSTEM, beginning on page 24 of this manual. Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and cor- Ca rect the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on pages 29 and 30 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTE- NANCE on pages 27 and 28. 36 30 34 28 34 30 0 29 0 PRO 9655 0 0 23