Weider Xr20 English Manual - Page 11
Slide a Cable Trap 66 and a 3 1/2° Pulley - parts
View all Weider Xr20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CABLE ASSEMBLY 19. Using a 3/8Ó x 3 1/2Ó Bolt (16), a 3/8Ó Flat 19 Washer (9), and a 3/8Ó Nylon Locknut (21), secure a 3 1/2Ó Pulley (15) and a Cable Trap (66) to the upper hole in the Press Frame (17). Make sure that the Cable Trap and the Pulley are oriented as shown. Hold a 3 1/2Ó Pulley (15) inside the indicated bracket on the Press Frame (17). Using a 3/8Ó x 8Ó Bolt (59), two 3/8Ó Flat Washers (9), and a 3/8Ó Nylon Locknut (21), attach the Pulley to the Press Frame as shown. 15 66 16 59 21 21 9 9 15 Bracket 17 20. Slide a Cable Trap (66) and a 3 1/2Ó Pulley 20 (15) onto a 3/8Ó x 3 3/4Ó Bolt (71). Insert the Bolt into the indicated hole in the Front Upright (42) from the direction shown. Hand tighten a 3/8Ó Nylon Locknut (21) with a 3/8Ó Flat Washer (9) onto the Bolt. Be sure that all parts are oriented as shown. Do not tighten the Nylon Locknut yet. 42 66 71 9 21 15 21. Slide a Cable Trap (66) and a 3 1/2Ó Pulley (15) onto a 3/8Ó x 3 3/4Ó Bolt (71). Insert the 21 Bolt into the indicated hole in the Front Upright (42) from the direction shown. Hand tighten a 3/8Ó Nylon Locknut (21) with a 3/8Ó Flat Washer (9) onto the Bolt. Be sure that all parts are oriented as shown. Do not tighten the Nylon Locknut yet. 42 9 21 66 71 15 11