Weider Xr20 English Manual - Page 15

LEG LEVER ASSEMBLY 33. Press 3/4Ó Round Inner Caps (34) into the ends of both Pad Tubes (28). Insert one Pad Tube (28) into the Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube. Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad Tube. See the left inset drawing. Insert the head of the 5/16Ó x 1 1/4Ó Carriage Bolt (72) into the keyhole in the Leg Lever (29). Be sure that the shoulder of the Carriage Bolt is firmly seated in the square part of the keyhole. See the right inset drawing. Orient the Short Cable (35) and the Curl Bar (77) as shown. This is the storage position for the Curl Bar. 33 36 30 29 30 34 28 34 34. Attach the Curl Pad (80) to the Curl Frame (79) with two 1/4Ó x 3/4Ó Screws (18). Insert a 1 1/2Ó Square Inner Cap (32) into each end of the Curl Frame (79). 29 Keyhole 72 34 32 77 35 80 CURL FRAME ASSEMBLY 35. Attach the Curl Frame (79) to the Seat Frame (36) by inserting the pin on the Curl Frame into the upper hole in the Seat Frame. Secure the Curl Frame with the Curl Knob (78). 18 32 35 18 79 78 79 Pin 36 15