Weider Xr20 English Manual - Page 12
Locate the Medium Cable 58.
View all Weider Xr20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
CABLE ASSEMBLY 22. Locate the Medium Cable (58). Route the 22 Medium Cable (58) under the 3 1/2Ó Pulley (15) attached to the bracket on the Press Frame (17). Be sure that the end of the Cable with the ball is on the indicated side of the Press Frame and that the Cable is between the Pulley and the crossbar on the Press Frame. 23. Route the Medium Cable (58) around the 23 3 1/2Ó Pulley (15) attached to the lower hole in the Front Upright (42). See the inset draw- ing. Be sure that the Cable Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. Tighten the 3/8Ó Nylon Locknut (21) and the 3/8Ó x 3 3/4Ó Bolt (71). 21 58 21 17 15 Ball Crossbar 42 15 58 42 15 71 66 58 Inset shows view from other side 24. Route the Medium Cable (58) around the 24 3 1/2Ó Pulley (15) attached to the upper hole in the Press Frame (17). Be sure that the Cable Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as shown. Make sure the 3/8Ó Nylon Locknut (21) and the 3/8Ó x 3 1/2Ó Bolt (not shown) are tight. 58 15 66 21 17 25. Route the Medium Cable (58) around the 3 1/2Ó Pulley (15) attached to the upper hole 25 in the Front Upright (42). See the inset draw- ing. Be sure that the Cable Trap (66) is turned to hold the Cable in place and that the Cable is routed around the Pulley as 42 shown. Tighten the 3/8Ó Nylon Locknut (21) and the 3/8Ó x 3 3/4Ó Bolt (71). 21 58 15 42 15 71 66 58 Inset shows view from other side 12