Weider Xr20 English Manual - Page 13
Seat Assembly, Cable Assembly
View all Weider Xr20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CABLE ASSEMBLY 26. Attach the end of the Medium Cable (58) to 26 the Long ÒUÓ-Bracket (57) with a 1/4Ó Nylon Locknut (2) and a 1/4Ó Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only two threads are showing above the Nylon Locknut, as shown in the inset drawing. 57 27. Note: Lift the Top Weight (76) on the 27 weight stack in order to create slack in the Long Cable (23) before beginning this step. Thread the 1/2Ó Plain Nut (81) about four turns onto the end of the Long Cable (23). Slide the 1/2Ó Flat Washer (82) onto the end of the Long Cable. Insert the end of the Long Cable (23) into the Weight Tube (63) and turn it clockwise two or three turns. Tighten the 1/2Ó Plain Nut (81) against the Flat Washer (82) (see the inset drawing). 2 10 2 10 58 23 81 76 57 58 82 63 23 81 82 63 28. Attach the Backrest (41) to the Front Upright (42) with two 1/4Ó x 2 1/2Ó Screws (43) and 28 42 two 1/4Ó Flat Washers (10). 41 43 10 SEAT ASSEMBLY 13