Whirlpool GC5SHAXVA Installation Instructions - Page 4

Opening Dimensions s Height dimensions are shown with the leveling legs extended to the minimum height of ¹⁄₄" (6.35 mm) below the refrigerator. NOTE: When leveling legs are fully extended to 1" (25 mm) below the refrigerator, add ³⁄₄" (19 mm) to the height dimensions. s Minimum fixed wall position is 13¹⁄₄" (34 cm) from the freezer door and 16¹⁄₂" (42 cm) from the refrigerator door. 13¹⁄₄" (34 cm) 36" (91.5 cm) A 16¹⁄₂" (42 cm) Door and Side Panels Factory Door Panels and Side Trim Kits All factory parts are available through your Whirlpool dealer or by calling Whirlpool Parts and Accessories at 1-800-442-9991. In Canada, call 1-800-807-6777. Decorator Door Panel Kits Decorator door panel kits are available only for models with factory-installed trim kits. Follow the kit instructions for installing the panels. NOTE: Door panel kits are not required for factory-installed stainless steel models. Color 23' Model 25' Model White #4396762 #4396758 Black #4396763 #4396759 Biscuit #4396764 #4396760 Stainless Steel #4396765 #4396761 Cabinet Side Trim Kits Cabinet side trim kits are available to customize refrigerator to cabinet face. Follow the kit instructions for installing the side trim. Color 23' Model 25' Model White #4396771 #4396789 Black #4396770 #4396790 Biscuit #4396769 #4396791 Stainless Steel #4396768 #4396792 Model Size Height A Standard Cabinet Height A Full-overlay* 23' (654 L) 25' (694 L) 69" (175.3 cm) 72" (182.9 cm) 69¹⁄₈" (175.6 cm) 72¹⁄₈" (183.2 cm) *For full-overlay cabinet doors with a trim kit, the opening height must be adjusted as shown. Door Swing Dimensions Location must permit doors to open to a minimum of 150°. Allow 13¹⁄₄" (34 cm) minimum space between the side wall and the freezer side of the refrigerator. Allow 16¹⁄₂" (42 cm) minimum space between the side wall and the refrigerator side. NOTE: Dimensions may vary based on model. 13⁵⁄₈" (34.5 cm) 41³⁄₄" (106 cm) 2⁵⁄₈" (6.6 cm) ¹⁄₂" (12.7 mm) 17" (43.0 cm) 0" 45¹⁄₂" (0.1 mm) (115.6 cm) 90˚ 150˚ Cabinet Side Panel Kits Cabinet side panel kits are available to customize the exposed side of the refrigerator. Follow the kit instructions for installing the side panel. Color 23' Model 25' Model Stainless Steel #4396748 #4396749 Custom Door Panels If you plan to install custom wood panels, you will need to create the panels yourself or consult a qualified cabinetmaker or carpenter. See dimension drawing for panel specifications. IMPORTANT: Panels weighing more than the recommended weight may cause damage to your refrigerator. Door panels should not exceed the weights listed in the following table. Model Size Refrigerator Freezer Door Panel Weight Door Panel Weight 23' (654 L) 28 lbs (12.7 kg) 16 lbs (7.3 kg) 25' (694 L) 30 lbs (13.6 kg) 17 lbs (7.7 kg) Flat panels: You can create a custom flat panel a maximum of ¹⁄₄" (6.35 mm) thickness to replace your decorator panels. Flat wood panels less than ¹⁄₄" (6.35 mm) thick are not recommended. 4