Whirlpool WDT730PAHV Installation Guide - Page 11
PREPARE DISHWASHER, Put dishwasher on its back, REMOVE ACCESS PANEL, Plastic panel, Metal panel
View all Whirlpool WDT730PAHV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
PREPARE DISHWASHER WARNING Tip Over Hazard Do not use dishwasher until completely installed. Do not push down on open door. Doing so can result in serious injury or cuts. WARNING Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. 8. Put dishwasher on its back REMOVE ACCESS PANEL - For Plastic Access Panels, go to Step 9 - For Metal Access Panels, go to Step 10 9. Plastic panel 1/4 turn Using a flat-blade screwdriver, turn the plastic fasteners 1/4 turn counterclockwise to unlock them. Remove panel. Do not remove tech sheet from access panel. Go to Step 11. 10. Metal panel Helpful Tip: Place cardboard under dishwasher until installed in cabinet opening to avoid damaging floor covering. Using 2 or more people, grasp sides of dishwasher door frame and place the dishwasher on its back. Do not use the door panel as a worktable without first covering it with a towel to avoid scratching the door panel. NOTE: On some models, once the dishwasher is on its back, pull on the door handle to remove it from the access panel. Using a 1/4" nut driver or Phillips screwdriver, remove 2 screws attaching access panel to dishwasher. Do not remove tech sheet from access panel. 11