Whirlpool WDT730PAHV Installation Guide - Page 21

Direct wire - connect ground wire

Get Whirlpool WDT730PAHV PDF manuals and user guides View all Whirlpool WDT730PAHV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

WARNING Wiring configuration Electrical Shock Hazard Electrically ground dishwasher. Connect ground wire to green ground connector in terminal box. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 54. Direct wire - secure cable in strain relief 52. Direct wire - connect ground wire Ground wire Ground screw Tighten strain relief screws to secure cable. 55. Direct wire - reinstall terminal box cover and wires Form bare ground wire into a U-shaped hook. Wrap ground wire hook clockwise around the ground connector screw and under the dishwasher. Securely tighten ground connector. 53. Direct wire - connect remaining wires Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside box. Close cover ensuring wires are not pinched. Use 1/4" nut driver or Torx® T20® screwdriver and previously removed screw to secure cover. Select UL Listed/CSA Approved twist-on wire connectors of the proper size. See the "Tools and Parts" section at the front of the guide for part details. Connect wires, black to black and white to white, using the twist-on wire connectors. NOTE: Do not pre-twist stranded wire. Twist on wire connector. Gently tug on wires to be sure both are secured. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
21
Tighten strain relief screws to secure cable.
Place wires inside terminal box. Insert tabs on left side of
cover. Make sure wires are tucked inside box. Close cover
ensuring wires are not pinched. Use
1
/
4
" nut driver or Torx
®
T20
®
screwdriver and previously removed screw to secure cover.
Wiring configuration
54.
Direct wire – secure cable
in strain relief
55.
Direct wire – reinstall terminal
box cover and wires
Form bare ground wire into a U-shaped hook. Wrap ground wire
hook clockwise around the ground connector screw and under
the dishwasher. Securely tighten ground connector.
Select UL Listed/CSA Approved twist-on wire connectors of
the proper size. See the “Tools and Parts” section at the front
of the guide for part details. Connect wires, black to black and
white to white, using the twist-on wire connectors.
NOTE:
Do not pre-twist stranded wire. Twist on wire connector.
Gently tug on wires to be sure both are secured.
WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
52.
Direct wire – connect ground wire
Ground
wire
Ground
screw
53.
Direct wire – connect
remaining wires