Whirlpool WDT730PAHV Installation Guide - Page 25

Install Access Panel

Get Whirlpool WDT730PAHV PDF manuals and user guides View all Whirlpool WDT730PAHV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

INSTALL ACCESS PANEL - For Plastic, begin with Step 60 - For Metal, begin with Step 63 Plastic Panel: 60. Reinstall access panel and fasteners Insulation (on some models) Metal Panel: 63. Reinstall access panels Place the plastic access panel against the dishwasher leg. Make sure insulation does not interfere with the float assembly. 61. Check access panel edge Place the panel against dishwasher legs. Using a Phillips screwdriver or 1/4" nut driver, reinstall the screws through the holes in the access panel. 64. Check lower panel edge Check that the lower edge of the access panel touches the floor. Adjust if necessary. 62. Tighten fasteners Check that the lower edge of the access panel touches the floor. Adjust if necessary. 65. Tighten screws 1/4 turn Tighten access panel screws. Using a flat-blade screwdriver, turn the fasteners 1/4 turn clockwise to lock into place. The fastener slot will be straight up and down when properly locked. Go to Step 65. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
25
Metal Panel:
Place the panel against dishwasher legs. Using a Phillips
screwdriver or
1
/
4
" nut driver, reinstall the screws through
the holes in the access panel.
Check that the lower edge of the access panel touches the
floor. Adjust if necessary.
Tighten access panel screws.
63.
Reinstall access panels
64.
Check lower panel edge
65.
Tighten screws
INSTALL ACCESS PANEL
– For Plastic, begin with Step 60
– For Metal, begin with Step 63
Plastic Panel:
Place the plastic access panel against the dishwasher leg.
Make sure insulation does not interfere with the float assembly.
Check that the lower edge of the access panel touches the
floor. Adjust if necessary.
Using a flat-blade screwdriver, turn the fasteners
1
/
4
turn
clockwise to lock into place. The fastener slot will be straight
up and down when properly locked. Go to Step 65.
60.
Reinstall access panel and fasteners
Insulation
(on some models)
61.
Check access panel edge
62.
Tighten fasteners
1/4
turn