Whirlpool WDT730PAHV Installation Guide - Page 5
First-Time Installations
View all Whirlpool WDT730PAHV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Other Parts Needed (not provided): 3/8" Compression x 3/4" Hose Fitting with rubber seal and 90° elbow (required to properly connect household water line to the dishwasher) (Whirlpool Part Number W10685193) First-Time Installations Check local codes. Check existing electrical supply. See the "Electrical Requirements" section. It is recommended that electrical connections be made by a licensed electrical installer. Additional Tools Needed: Household Wiring (Metallic) Strain Relief to fit 7/8" (22 mm) hole (required to properly secure household wiring to the dishwasher terminal box) (Whirlpool Part Number 4396672) NOTE: Use only UL Listed/ CSA Approved part. Twist-On Wire Connectors NOTES: ■■ Confirm proper size for connecting your gauge of household wiring to the 16-gauge wiring in the dishwasher. ■■ Use only UL Listed/CSA Approved parts. Call us at our toll-free number, visit our website listed in the User Guide for part numbers above, or see local electrical/plumbing supply retailer for equivalent. Optional Accessory Parts Available: Moisture Barrier Tape NOTE: Moisture barrier tape is recommended if installing a dishwasher under a wooden countertop (Whirlpool Part Number 4396277). Small tubing cutter Wire stripper Cordless drill with 1/2", 3/4", and 11/2" hole saw bits Additional Parts Needed (not provided): Copper Tubing (3/8" O.D. suggested) or Flexible Braided Water Supply Line Kit (Whirlpool Part Number W10278635RP). Kit includes braided hose and 3/8" compression x 3/4" hose fitting. Screw-Type Clamps 11/2"-2" (38mm-50 mm) (3 maximum) Side Panel Kit For enclosing the side of the dishwasher when installing it at the end of your cabinetry (Whirlpool Part Number varies with color.) Call us at our toll-free number or visit our website listed in the User Guide for part numbers above. Optional - Longer Drain Hose Maximum length 12 ft (3.7 m) (Whirlpool Part Number 3385556) NOTE: Must meet AHAM/IAPMO test standards, fit 1" (25 mm) drain connection, and be resistant to heat and detergent Call us at our toll-free number, visit our website listed in the User Guide for part numbers above, or see local plumbing supply retailer for equivalent. NOTE: If using a flexible braided hose, replace inlet hose after 5 years to reduce the risk of hose failure. Record hose installation or replacement dates on the hose for future reference. 5