Xerox 4260X Quick Use Guide - Page 9

Switch On the Machine - box

Page 9 highlights

Switch On the Machine Once the machine has been assembled it must be configured. This is done using the Product Enablement Key when the machine is switched on for the first time. The Product Enablement Key is delivered in a plastic tube inside the box with the machine. The procedure to configure the machine is as follows: 1 Locate the tube containing the Product Enablement Key. Remove the plastic card and carefully press Product Enablement Key out the key. 2 Connect the Power cord to the machine and a suitable power supply outlet. 3 Switch on the machine. 4 Install the Product Enablement Key into the Card Reader Slot at the back of the machine. Card Reader slot Green LED 5 The Language Default screen will be displayed. Select your chosen language and then select Save. 6 The Installation Wizard screen will be displayed. Select Next. 7 The Product Enablement Settings screen will be displayed. Follow the instructions on the screen. NOTE: When the Green LED light stops blinking and remains on continuously (about 10 seconds), the configuration is successful. 8 Remove the Product Enablement Key and select Next on the display. quick use guide 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

quick use guide
5
Switch On the Machine
Once the machine has been assembled it must be configured. This is done using the
Product Enablement Key when the machine is switched on for the first time.
The Product Enablement Key is
delivered in a plastic tube inside the
box with the machine. The procedure
to configure the machine is as
follows:
1
Locate the tube containing the
Product Enablement Key
. Remove
the plastic card and carefully press
out the key.
2
Connect the Power cord to the machine and a suitable power supply outlet.
3
Switch on the machine.
4
Install the Product Enablement Key into the Card Reader Slot at the back of the
machine.
5
The
Language Default
screen will be displayed. Select your chosen language and
then select
Save
.
6
The
Installation Wizard
screen will be displayed. Select
Next
.
7
The
Product Enablement Settings
screen will be displayed. Follow the instructions on
the screen.
NOTE:
When the Green LED light stops blinking and remains on continuously (about
10 seconds), the configuration is successful.
8
Remove the Product Enablement Key and select
Next
on the display.
Product Enablement Key
Card Reader slot
Green LED