Xerox 6180N Getting Started v3.74 - Page 24

DOCUSP 3.74 LCDS User Control of Resources ¨ In this release, LCDS resources are not displayed until the operator selects the Display button. ¨ Previously, selecting the LCDS Resource Manager tab in Administration caused all LCDS resources to display. This was time consuming, especially for customers with tens of thousands of resources. JDL staple support for DocuPrint 75/90 ¨ The LCDS STAPLE command is now available for use with the DP 75/90. The system does not require override settings to be set in the Queue properties for stapling to work. ¨ The STAPLE command must be invoked before the start of the job or on the first record of data in the job. Otherwise, the DP 75/90 will ignore the STAPLE switch if a JDE/JDL switch is made in the middle of the job. ¨ Jobs can be offset and stapled simultaneously. ¨ Jobs requiring N to 1 or Face Up and STAPLE=YES are forced to print 1 to N and Face Down due to a restriction on the stapling feature on the DP 75/90. ¨ Jobs that contain over 50 pages will not be stapled, and the default setting is to fault the job. To change the setting to print the job unfinished in the System Preferences Job Policy tab: · Select Print Job Unfinished under the Overlimit Finishing section. · Select Check Set-Size Before Printing under the Overlimit Finishing section. 3-10 XEROX DOCUMENT SERVICES PLATFORM SERIES GETTING STARTED