Xerox 6180N Getting Started v3.74 - Page 28

DOCUSP 3.74 4-2 Caveat Applicable printer product Anti-aliasing may cause width changes and color shifts for certain lines. A saved FRF job with saved DRI that is edited in Reprint Manager faults with the following error message: "Processing error - This job cannot be printed because the Job Data File or the Pathname does not exist". Do not edit an FRF job with DRI. An FRF saved job displays incorrectly in the viewer, but prints correctly. DocuColor 2045/2060/606 DocuColor iGen3 DocuColor 2045/2060/6060 DocuColor iGen3 DocuColor 2045/2060/6060 DocuColor iGen3 Trapping settings do not stay changed when the changes are applied on a queue. The SWOP emulation output options are not working for selected output emulations. For example, incoming data created as SWOP CMYK prints correctly but native CMYK cannot be output as SWOP CMYK. After completing a calibration, the calibration must be applied to a stock group. DocuColor 2045/2060/6060 DocuColor iGen3 DocuColor 2045/2060/6060 DocuColor iGen3 DocuColor 2045/2060/6060 DocuColor iGen3 Do not add an ICC profile while a large job is printing. DocuColor 2045/2060/6060 DocuColor iGen3 When a TRC is deleted, any queues using the TRC are set to a TRC of None and Override is set. If a TRC is deleted, ensure that the queues using the TRC are set to a new TRC and the jobs using the queue print correctly. The LCDS Sizing feature is not honored correctly on the DocuSP. DocuColor 2045/2060/6060 DocuColor iGen3 DocuTech/DocuPrint 75/90 DocuPrint 1xx EPS A paper jam message is not cleared when the jam is cleared from the printer and the DocuSP is restarted. After clearing the jam, open and close both paper trays 1 and 2. This should cause the jam message to reset. When using the Socket Gateway to submit LCDS jobs, the jobs may contain missing pages or data, extra pages or data, the job may abort, or a C03-308 error may occur. If a custom paper size is programmed in the Queue Manager to be Short Edge feed, LCDS jobs raise a message "Edge marking values are out of range". If necessary, program the custom paper size as a Long Edge Feed. DocuTech 61xx DocuTech/DocuPrint 75/90 DocuPrint 1xx EPS DocuTech/DocuPrint 75/90 DocuPrint 1xx EPS DocuTech/DocuPrint 75/90 DocuPrint 1xx EPS The Reposition Output display only shows the end of the job and does not show the end of the set. DocuTech/DocuPrint 75/90 DocuPrint 1xx EPS XEROX DOCUMENT SERVICES PLATFORM SERIES GETTING STARTED