Yamaha AW2816 Owner's Manual - Page 91
Using AUX send/return to apply an effect, Check the patching, Recalling an effect program
View all Yamaha AW2816 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Chapter Using the internal effects 5 Using AUX send/return to apply an effect This section describes the example of using effect 1 via AUX bus 5 in a send/return configuration. Check the patching First we will check whether the AUX send/return patching for effect 1 is set appropriately. 1 Press the [PATCH] key ¡ [F1] key. The PATCH screen Patch IN page will appear. Recalling an effect program from the library The internal effects of the AW2816 allow you to use 41 different effect types, such as REVERB HALL, GATE REVERB, and STEREO DELAY. With the factory settings, 41 effect programs using these effect types are preset in an area of internal memory called the "effect library." Here's how to recall an effect program into effect 1. 1 Press the [AUX 5] key ¡ [F2] key. The AUX5/EFF1 screen Library page will appear, in which you can store or recall effect programs. A list of the effect programs is shown in the lower part of the display. 2 In the EFFECT PATCH area, make sure that EFF1 is set to "AUX 5." In the EFFECT PATCH area of the Patch IN page, you can select whether effect 1/2 will be used via an AUX bus or inserted into a specific channel. With the default settings of the AW2816, AUX 5 (AUX bus 5) is assigned to EFF 1 (effect 1), and AUX 6 (AUX bus 6) is assigned to EFF 2 (effect 2), as shown in the illustration above. Tip! If EFF1 is set to "INSERT," move the cursor to the setting and turn the [DATA/JOG] dial. In the popup window that appears, move the cursor to the OK button, and press the [ENTER] key to switch EFF1 to the "AUX 5" setting. 3 In the MIXER CHANNEL INPUT ASSIGN area, make sure that RTN 1 is set to "EFF1 L/R." In the MIXER CHANNEL INPUT ASSIGN area of the Patch IN page, you can select the signal that will be assigned to the input channels/return channels of the mixer. With the default settings, "EFF1 L/R" (L/R outputs of effect 1) is assigned to RTN1 (return channel 1). Tip! If RTN1 is set differently, move the cursor to the setting and turn the [DATA/JOG] dial to change it to "EFF1 L/R." Tip! Effect library numbers 001-041 contain read-only effect programs using each effect type. The AW2816's effect library can be used by both effect 1 and effect 2. However, effect programs that use "HQ-Pitch" (library number 19) can be used only by effect 2. 84 Operation section