Yamaha CLP-280 Owner's Manual - Page 112
Connect the speaker cord., Attach C., clip the cord into the holders. At this time, - clp 240
View all Yamaha CLP-280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
CLP-280/270: Keyboard Stand Assembly 5. Connect the speaker cord. 5-1 Remove the twist tie attaching the speaker cord. 5-2 Insert the speaker cord plug into the connector so that the tab extends toward the front when viewed from the rear. 7. Attach C. 7-1 Place on D, the stopper-wood at the bottom edges of C, then secure the top. 7-2 Secure upper right and left of C using two 4 x 14mm thin screws. 7-2 110 Appendix 6. Connect the pedal cord. 6-1 Insert the pedal cord plug into the [PEDAL] connector. 6-2 Attach the cord holders to the instrument, then clip the cord into the holders. At this time, be careful that the pedal cord isn't loose between the plug and cord holder. 6-3 Use a twist tie to bundle the pedal cord. 6-1 7-1 7-3 7-3 Secure upper center and lower of C using five 4 x 20mm tapping screws. 8. Connect the power cord. Insert the AC power cord plug into the [AC INLET]. 6-2 6-3 240 220 For models that feature a voltage selector: Set the voltage selector to an appropriate voltage. 127 112 CLP-280/270 Owner's Manual