Yamaha CLP-280 Owner's Manual - Page 79
EQ LowFreq. EQ L.Freq], RotarySpeed Rot.Speed] - user manual
View all Yamaha CLP-280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Detailed settings for the voices [VOICE SETTING] Detailed Settings Setting the rotation speed of the rotary speaker* [RotarySpeed (Rot.Speed)] This will be displayed only if Rotary is selected for the DSP Type parameter explained above. It sets the rotation speed of the rotary speaker effect. See the procedure on page 69. A B Main RotarySpeed Set?--> Slow NO YES C D Setting range: Slow/Fast Adjusting the depth of the DSP effect* [DSPDepth] This sets the depth of the DSP effect (page 78). Some DSP Type settings do not allow you to set the DSPDepth. See the procedure on page 69. A Main DSPDepth C Set?--> 127 B NO YES D Setting range: 1 (output only the original sound with almost no effect applied) - 127 (output only the sound processed by the effect) Adjusting the resonance effect* [HarmonicContent (Harmonic)] See the procedure on page 69. A B Main Set?--> HarmonicContent 0 NO YES C D Setting range: -64 - +63 TIP Resonance can produce a distinctive "peaky" tone, making the sound brighter and harder. Adjusting the low-range frequency of the equalizer* [EQ LowFreq. (EQ L.Freq)] TERMINOLOGY Equalizer: An audio equalizer divides the frequency spectrum into multiple regions and enables the user to adjust the relative amplitude of each region. Low Gain High Gain Adjusting the brightness of the sound* [Brightness] See the procedure on page 69. A B Main Brightness Set?--> 0 NO YES C D Setting range: -64 - +63 Low Freq. High Freq. See the procedure on page 69. A Main EQ LowFreq. Set?--> 32 C Setting range: 32 Hz - 2.0 kHz B NO YES D CLP-280/270 Owner's Manual 79