Yamaha DME32 DME32 V1.5 Supplement - Page 3
down by clicking the two arrow buttons shown here.
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 When a channel is soloed, "SOLO OFF" changes to "SOLO ON." This is convenient on control windows where the input channels are organized into pages and it's not possible to see all SOLO buttons simultaneously. For components with five or more outputs (i.e., five or more bus level controls per input channel), the bus level controls in the IN section can be scrolled up or down by clicking the two arrow buttons shown here. The parameter ranges for the Matrix Mixers are as follows. Section Parameter Range Description IN OUT Bus level PHASE SOLO ON/OFF Fader ON/OFF Fader Mute to +10.0 dB NOR/REV ON/OFF ON/OFF Mute to +10.0 dB ON/OFF Mute to +10.0 dB Adjusts the level of each input channel signal that is fed to each output channel Inverts each input channel signal Solos each input channel Mutes each input channel Adjusts the level of each input channel Mutes each output channel Adjusts the level of each output channel For Matrix Mixer components with more than four inputs or outputs, channels are arranged into pages consisting of four channels. Previously, channels were arranged into pages consisting of six channels. DME32-V1.5 Owner's Manual Supplement