Yamaha DME32 DME32 V1.5 Supplement - Page 4
Stereo PEQ & GEQ Components
View all Yamaha DME32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
4 Stereo PEQ & GEQ Components The five new stereo PEQ (parametric equalizer) and three new stereo GEQ (graphic equalizer) components make it easier to process stereo signals. Essentially these are stereo versions of the existing EQ components. PEQ The five stereo PEQ components are shown below. Each stereo PEQ component features two inputs and two outputs. Each PEQ control window features an EQ graph and INPUT, EQ BAND, and OUTPUT sections. Since the only difference between all the stereo PEQ components is the number of bands, only the stereo 4 BAND PEQ control window is shown here. The parameter ranges for the stereo PEQ components are as follows. Section Parameter Range Description ON/OFF INPUT LEVEL PHASE Q F EQ BAND G ON/OFF Type1 OUTPUT LEVEL MUTE ON/OFF Mute to 0.0 dB NOR/REV 10-0.10 20.0 Hz-20.0 kHz -15 dB to +15 dB ON/OFF Peaking/L.Shelf or H.Shelf Mute to 0.0 dB ON/OFF Turns the component on and off Adjusts the input signal level Inverts the input signal Adjusts the selectivity of each band Adjusts the frequency of each band Adjusts the gain of each band Turns each band on and off Sets the filter type for the band Adjusts the output signal level Mutes the output 1. Top and bottom bands only. DME32-Owner's Manual Supplement