Yamaha DME32 DME32 V1.5 Supplement - Page 8

8 Recall Safe With the new Recall Safe function, parameter settings can be left unchanged when scenes are recalled. Recall safe can be applied at the configuration, component, or parameter level. Recall safe applies to rotary controls, sliders, and buttons but not combo boxes (e.g., the SLOPE & TYPE boxes of the crossover components). Recall Safe for Individual Parameters 1 Select the control of the parameter that you want to make safe. The selected control is highlighted by a green box. 2 While holding down the shift key, right-click the control. The following menu appears. 3 Choose Recall Safe. The selected control is made safe. Next time this menu is accessed for this parameter, a check mark is displayed next to "Recall Safe", indicating that the parameter is safe. Controls, sliders, buttons, etc., appear red when they are set as safe. Safe parameters are not changed when scenes are recalled. 4 To turn off recall safe, access the previous menu and choose Recall Safe again. The recall safe setting of individual parameters cannot be changed in Run mode. Recall Safe for Individual Components 1 Select the component that you want to make safe. The selected component is highlighted by a red box. 2 While holding down the shift key, right-click the component. The following menu appears. DME32-Owner's Manual Supplement