Yamaha DME32 DME32 V1.5 Supplement - Page 6

6 GEQ The three stereo GEQ components are shown below. Each GEQ control window consists of five sections: INPUT, HPF, LPF, EQ bands, and OUTPUT. The center frequency of each band is shown above each slider. Since the only difference between all the GEQ components is the number of bands, only the stereo 15 BAND GEQ control window is shown here. The parameter ranges for the stereo GEQ components are as follows. Section Parameter Range Description ON/OFF ON/OFF INPUT LEVEL PHASE Mute to 0.0 dB NOR/REV Frequency 20.0 Hz-20.0 kHz HPF ON ON/OFF Frequency 20.0 Hz-20.0 kHz LPF ON ON/OFF EQ band Gain -15 dB to +15 dB OUTPUT LEVEL Mute to 0.0 dB MUTE ON/OFF Turns the component on and off Adjusts the input signal level Inverts the input signal Adjusts the HPF cutoff frequency Turns the HPF on or off Adjusts the LPF cutoff frequency Turns the LPF on or off Adjusts the gain of each band Adjusts the output signal level Mutes the output DME32-Owner's Manual Supplement