Yamaha EMX62M Owner's Manual - Page 22

20 Specifications ■ Input Specifications Input connectors PAD Actual load impedance CH INPUT (Lo-Z) OFF (CH1-4) ON CH INPUT (Hi-Z) (CH1-4) OFF ON LINE IN (CH5) (1-2) Super Hi-Z IN (CH6) (1-2) AUX IN 2TR IN (1-2) 3 kΩ 10 kΩ 10 kΩ 470 kΩ 10 kΩ 10 kΩ Nominal impedance 50-600Ω Mics 600Ω Lines 50-600Ω Mics 600Ω Lines 600Ω Line 1kΩ 600Ω Line 600Ω Line Sensitivity *1 -62 dB (0.616 mV) -32 dB (19.5 mV) -52 dB (1.95 mV) -22 dB (61.6 mV) -22 dB (61.6 mV) -42 dB (6.16 mV) -22 dB (61.6 mV) -22 dBV (79.4 mV) Input level Nominal level Connector Max. before cliping type -50 dB (2.45 mV) -20 dB (77.5 mV) -20 dB (77.5 mV) XLR-3-31 +10 dB (2.45 V) type*2 -40 dB (7.75 mV) -10 dB (245 mV) -10 dB (245 mV) -30 dB (24.5 mV) -10 dB (245 mV) -10 dB (245 mV) +20 dB (7.75 V) +20 dB (7.75 V) 0 dB (0.775 V) +20 dB (7.75 V) Phone jack (TRS) *2 Phone jack*3 Phone jack*3 Phone jack*3 -10 dBV (316 mV) +17.8 dBV (7.76 V) Phono jack *1. Sensitivity is the lowest level that can produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set at maximum gain. (All level controls are at maximum position.) *2. Balanced. *3. Unbalanced. • 0 dB= 0.775 Vrms, 0 dBV= 1 Vrms. ■ Output Specifications Output connectors SPEAKERS OUT (1, 2) MAIN OUT MONITOR OUT EFFECT OUT PHONES OUT REC OUT (1, 2) Actual source impedance 0.1Ω 600Ω 600Ω 600Ω 35Ω 600Ω • PHONE JACKS are unbalanced. • 0 dB= 0.775 Vrms, 0 dBV= 1 Vrms. Nominal impedance 4/8Ω Speaker 10 kΩ Lines 10 kΩ Lines 10 kΩ Lines 40 Ω Phones 10 kΩ Lines Output level Connector type Nominal Max. before cliping 40 W/4Ω 200 W/4Ω Phone jack +4 dB (1.23 V) +20 dB (7.75 V) Phone jack +4 dB (1.23 V) +20 dB (7.75 V) Phone jack +4 dB (1.23 V) +20 dB (7.75 V) Phone jack 33 mW 175 mW Phone jack -10 dBV (316 mV) +10 dBV (3.16 V) Phono jack ■ Dimensions 328 482 305 Specifications are subject to change without prior notice. EMX62M-Owner's Manual Unit: mm