Yamaha MT2X Owner's Manual - Page 21
Setting the monitor and meter s, Adjusting the input level
View all Yamaha MT2X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4. Setting the monitor and meter sections Set the PHONES SELECT switch to the "STEREO" position. Set the PHONES volume to around "7". Make sure the METER SELECT switch is in the "4 TRK" position. 5. Adjusting the input level Set the channels 1 and 2 input switches to the MIC/LINE position. Set the MASTER fader to "7". Set the PAN controls for channels 1 and 2 between the center and the extreme "L" position, as shown. Push the input faders for channels 1 and 2 up to "7". Set the GAIN controls to the LINE position, start the rhythm programmer and adjust its output level so the "+3" segment on the track-1 level meter lights only briefly on the signal peaks. Pull the input faders back down to "0". - The proper input levels for channels 1 and 2 are now set. - 19