Yamaha MT2X Owner's Manual - Page 9
Master Fader, Aux Master Send Control, Aux Return Control, Sync Switch, Power Indicator
View all Yamaha MT2X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
MASTER FADER This controls the level of all the input faders, as well as the final level of the effected signal of the AUX RTN control and the sound mixed through the stereo mix buss. The output level of the ST OUT jack (the recording level at mixdown) and the recording level during ping-ponging are also adjusted with this control. Set the control input faders at "7" for best results. AUX MASTER SEND CONTROL This control adjusts the level of the effect-mixed signals from each channel (adjusted by each AUX control ) as well as the AUX signal for monitoring use. The final output is through the AUX SEND jack AUX RETURN CONTROL This control adjusts the input level of effects or submixers connected to the AUX RTN jack . The level of the effect in relation to the "dry" sound can be set with this control. SYNC SWITCH Normally left in the "OFF" position, this switch should be set to REC or PB if this unit is to be used for synchronized operation with MIDI products like synthesizers and rhythm machines. Synchro operation is explained in the section on Sync-Recording on page 34. POWER INDICATOR This indicator lights when the power switch rear panel is turned on. on the 7